Nexgrill Grill Parts | Burners, Cooking Grates, Heat Shields & Radiants and More (2024)

15-7/8" Stainless Steel Tube Burner ("Screw" Mounted Carry Over Tube Style)

Item#80013421

15-7/8" long stainless steel tube burner. Narrow end which connects to the valve includes wire mesh spider guards. IMPORTANT: This burner uses a "screw" mounted style carry overtube.

Nexgrill Grill Parts | Burners, Cooking Grates, Heat Shields & Radiants and More (2)In Stock

$11.99

View

Add

16-7/8" Long X 1" Diameter Stainless Steel Tube Burner

Item#80016864

Stainless steel tube burner.Measures 16-7/8" long x 1"in diameter.Fits a variety of Charbroil Conventional and Tru-Infrared models,which utilize a "screw mount" carry over tube. The venturi or valve end of the tubehas an insect screen, air mixture screw and mounting holes for the electrode. The back end of the tube features a short 90 degree bend with a centered mounting screw hole and a hole forthe carry over tubemounting screw.Burner mounting hardware included (oneeach, screw, flat washer and lock washer). Genuine Charbroil Part.

Nexgrill Grill Parts | Burners, Cooking Grates, Heat Shields & Radiants and More (4)In Stock

$11.99

View

Add

Tube Burner - Stainless Steel - 16-1/2in.

Item#BBQT1

Stainless Steel Tube Burner, measures 16-1/2in. from end-to-end including mounting flange. Burner mounting flange has a single centered hole.

Turn up the heat with a clean flame by replacing old burners with these new high quality BBQ Grillware stainless steel tube burners to enjoy consistent surface heat, just like when your grill was new.

Fitment:

  • BBQ Grillware models GGPL-2100, GSC-2418, GSC-2418N
  • Various other gas bbq grill brands/models that require a 16-1/2in. tube burner.

Key Features:

  • Air/fuel mixture adjustment shutter for precise control
  • Durable stainless steel construction for longevity

Included:

  • (1) Stainless Steel Tube Burner - 16-1/2in.

15-3/8" Stainless Steel Tube Burner (Replaces Brinkmann OEM Part 154-4220-1)

Item#BMTB4

15-3/8" long stainless steel burner tube. Fits many Brinkmann andNexgrill models. Features an air mixture adjustment shutter with insect screen on the valve end, an offset mounting hole on the back end and an attached electrode mounting bracket.

Nexgrill Grill Parts | Burners, Cooking Grates, Heat Shields & Radiants and More (8)In Stock

Retail: $38.25

$21.39

View

Add

15-7/8" X 2-1/4" Wide Tent Top Cast Iron Burner

Item#CIJA

Cast iron burner with an angled tent shaped top. Burner dimensions are 15-7/8" long X 2-1/4" wide. The length measurement includes the bottom venturi tube length. The mounting pin clip is included. IMPORTANT: Measurement from the end of the venturi (valve end) pipe to the center of the rear mounting peg (located on the bottom of the burner) is 15-1/4", please verify this dimension. (Product note: This slightly narrower burner economically replaces OEM 80018595.)

Nexgrill Grill Parts | Burners, Cooking Grates, Heat Shields & Radiants and More (10)In Stock

Retail: $43.15

$23.95

View

Add

12-3/4" Cast Iron Burner (Replaces Brinkmann OEM Part 154-2550-0)

Item#CIKR

12-3/4" long cast ironbarburner (length measurement is total, "tip to tip").The width measured across the top of the burner is 2-1/8". The venturi pipe extends 3-3/4" from the main burner body and has a 1/2" diameter hole for the gas valve orifice stem. Features a "tapered barrel body" and amounting peg that is 10-7/8" from the end of the venturi pipe (valve end) to the center of the peg. Mounting cotter pin is included. Fits many Brinkmann, Sears/Kenmore and other brands.

15-7/8" X 2-7/8" Wide Angled Top Cast Iron Burner

Item#CIT

Cast iron bar burner. Burner measures 15-7/8" long X 2-7/8" wide across the angled top portion. Venturi pipe extends 1-7/8" past the body of the burner. Features air/gas mixtureadjustment locking screw at venturi end. IMPORTANT: This burner has a 1/2" widevalve stem opening at the venturi end and the distance from the end of the venturi pipe to the center of the bottom mounting peg is 15-3/8". Mounting peg cotter pin included.

Nexgrill Grill Parts | Burners, Cooking Grates, Heat Shields & Radiants and More (14)In Stock

Retail: $38.30

$26.55

View

Add

Cast Stainless Steel Burner - (15-7/8in. x 2-5/8in.)

Item#CIT-SS

High Quality Cast Stainless Steel Burner for longevity and heat distribution and retention. Features a stainless steel air mixture adjustment shutter with insect screen, and rear mounting peg with Cotter Pin clip.

Fits a variety of Grill Brands that have 3, 4 and 5 burner models.

These Cast Stainless Steel Burners for three to five burner grills aren't your run-of-the-mill grill components; they're the backbone of your outdoor cooking empire. Crafted with precision and durability in mind, these burners are like the Iron Man suits of the grilling world—sleek, powerful, and ready to take on whatever culinary challenge you throw their way. With their heavy-duty construction and superior heat retention, these Grillparts.com Cast Stainless Steel Burners ensure consistent cooking temperatures across the board, so you can kiss unevenly cooked meals goodbye. Whether you're searing up a steak or slow-roasting some veggies, these burner bad boys have got your back.

Measurements:

  • Length: 15-7/8in.(Tip-to-tip)
  • Width: 2-5/8in. (Across the angled top)
  • Venturi pipe extends 2-3/8in. past the body of the burner.
  • IMPORTANT: Please verify this dimension; Measurement from the end of the venturi (valve end) pipe to the center of the rear mounting peg (located on the bottom of the burner) is 15-13/16in.

What’s Included:

  • (1) Cast Stainless Steel Burner - (15-7/8in. x 2-5/8in.)
  • Sold individually, more than one required
  • Highest quality aftermarket part

Nexgrill Grill Parts | Burners, Cooking Grates, Heat Shields & Radiants and More (16)In Stock

Retail: $113.40

$68.59

View

Add

16-7/8" Stainless Steel Tube Burner

Item#CTB1

Stainless steel straight tube burner. Mounting tab has a 90 degree bend and is manufactured with dual slotted holes for mounting. Measures 16-7/8" end to end.

Nexgrill Grill Parts | Burners, Cooking Grates, Heat Shields & Radiants and More (18)In Stock

Retail: $42.30

$24.39

View

Add

14-3/8" X 1" Diameter Stainless Steel Tube Burner

Item#G431-0300-W2A

Stainless steel tube burner. Measures 14-3/8" long x 1" in diameter. Fits a variety of Charbroil, Kenmore and many other brands/models, which utilize a "screw mount" carry over tube. The venturi or valve end of the tube has an insect screen, air mixture screw and mounting holes for the electrode. The back end of the tube features a short 90 degree bend with a centered mounting screw hole and a hole for the carry over tube mounting screw. Mounting hardware included. Genuine Charbroil Part. (Replaces Part G431-0300-W2)

Nexgrill Grill Parts | Burners, Cooking Grates, Heat Shields & Radiants and More (20)In Stock

$15.39

View

Add

16" Stainless Steel Looped Tube Burner

Item#JATB1

Round looped tube burner. Stainless steel. Measures 16" tip to tip X 4-1/2" wide. Mounting end has a flat flange with holes drilled on each side.

Nexgrill Grill Parts | Burners, Cooking Grates, Heat Shields & Radiants and More (22)In Stock

Retail: $58.00

$31.55

View

Add

16-5/8" Stainless Steel Looped Tube Burner

Item#NGB1

Stainless steel loopedtube burner. Measures 6-1/2" wide by 16-5/8" long. Features an adjustable air shutter and spot welded, centered mounting screw with nut.

Nexgrill Grill Parts | Burners, Cooking Grates, Heat Shields & Radiants and More (24)In Stock

Retail: $56.60

$31.45

View

Add

Nexgrill Grill Parts | Burners, Cooking Grates, Heat Shields & Radiants and More (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Amb. Frankie Simonis

Last Updated:

Views: 6494

Rating: 4.6 / 5 (56 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Amb. Frankie Simonis

Birthday: 1998-02-19

Address: 64841 Delmar Isle, North Wiley, OR 74073

Phone: +17844167847676

Job: Forward IT Agent

Hobby: LARPing, Kitesurfing, Sewing, Digital arts, Sand art, Gardening, Dance

Introduction: My name is Amb. Frankie Simonis, I am a hilarious, enchanting, energetic, cooperative, innocent, cute, joyous person who loves writing and wants to share my knowledge and understanding with you.